Fireplace Directory

Saranac I Pellet Stove A pellet Fireplace insert is an economic and efficient way to heat your living space. When you upgrade that dusty, drafty wood-burning fireplace to a sealed pellet firebox, you will realize the virtues of burning wood in pellet form. The 50# hopper capacity allows you to burn for extended periods of time without the mess and hassle of constantly feeding split wood into the fireplace. Available with a thermostat, just set it and forget it. Specifications: -Must choose door finish available in black, gold or nickel options -50,000 BTUs -Fully automatic controls and fuel feed -Convenient, large easy-slide ash drawer -Electronic igniter -2400 sq ft heat capacity -Hi/Low and On/Off Thermostat Compatible -50lb hopper capacity -Approved for installation in residential, mobile homes and alcoves. -86% Efficient -When the unit is being installed on a combustible floor a 1/2″” thick non-combustible hearth pad must be installed under the unit. The pad must extend at least the width of the appliance and at least the depth of the appliance plus 6″” (152 mm) in front of the appliance. This applies for both the freestanding unit and the insert. Saranac Pellet Stove Owner’s Manual and Installation Information Metalbestos gives you the safe, efficient, and cost-effective venting system that’s engineered precisely for pellet and corn burning stoves. Model VP Pellet Pipe has been tested and listed by Underwriters’ Laboratories, Inc., in accordance with UL-641 Standard for Low Temperature Venting Systems, as well as the applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. Model VP Pellet Pipe, when installed according to Metalbestos installation instructions, complies with National Safety Standards, such as NFPA -211. The system is rated for flue temperatures up to 570F.4″” The 3VP Thru-the-Wall Pellet Kit has the following: -1 Horizontal Cap -1 90 degree Elbow -1 Wall Bracket -5 One-foot Pipe Lengths -1 Tee

powered by Yahoo shopping